Photo Gallery > Big Block Marine Engine Components
-
4" exhaust elbow
304 s/s 4" exhaust elbow. Raw salt water is injected internjally to keep cool.
-
90 degree nipple
Cast 316 s/s elbow on raw water strainer located outside at stern
-
Motor mount
Custom 304 s/s engine mount still shining afer 4 years! Note the rusty grade 8 carbon steel mounting bolt. As well as the contaminated and rusting NON-electropolished "grey' base plate.
-
316 inline muffler
Hardin Marine inline muffler. These were passivated only.
-
90 degree 4" 304 elbow
another shot tof the 90 degree exhaust elbow.
-
Raw water strainer nipple
Close up of buffed/electroplished raw water strainer nipple
-
316 piping components
Power steering cooler s/s inlet pipes
-
Cooling system pipe
1.5"x0.65"wall 304 s/s closed cooling component tubing. Circulates glycol heat transfer fluid from heat exchanger to engine block, aluminum heads and intake.
-
-
-
1" 316 heat exchange tube
316 s/s heat exchange tubing.
-